Description
Details
Zebralight H600Fd mark IV Floody Headlamp.
Uses an 18650 li-ion battery
Headband is included. Battery is not included.
This lamp requires batteries that are 65 mm long, it does not work with protected batteries (such as from Keeppower, EagleTac or Enerpower) because they are too long.
Uses an 18650 li-ion battery
Headband is included. Battery is not included.
This lamp requires batteries that are 65 mm long, it does not work with protected batteries (such as from Keeppower, EagleTac or Enerpower) because they are too long.
Additional Information
Details
Main Features and Specifications
- Cree XHP50.2 Neutral White LED
- Nominal CCT: 5000K
- Typical CRI: 93-95
- Tint deviation: 3-step
- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
- Light Output (runtimes)
- High: H1 1568 Lm (PID, ) or H2 980 Lm (PID, )/562 Lm (PID, )/296 Lm ()
- Medium: M1 143 Lm () or M2 63 Lm ()/25.7 Lm ()/9.6 Lm ()
- Low: L1 3.3 Lm () or L2 1.0 Lm ()/0.3 Lm ()/0.08 Lm ()
- Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
- Operating Voltage Range: 2.7V - 6.0V
- Battery: One 18650 size (up to 69mm) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
- Parasitic Drain: Negligible (much less than the self discharging of a battery)
- Beam Type
- Floody beam from frosted lens, with 90 degree beam spread
-
- Dimensions
- Head Diameter: 0.95 inch (24.2 mm)
- Length: 3.85 inch (97.8 mm)
-
- Weight
- 1.4 oz (39 gram)
- 3.0 oz (84.6 gram) with ZL635 battery
- 4.4 oz (124.6 gram) with ZL635 battery and headband
-
- Features
- PID thermal regulated outputs (three highest output levels)
- Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
- Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Durable electronic soft-touch switch
- Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Durable natural hard anodized finish (Type III Class I)
- Sealed and potted LED driver circuitry
- Tempered optical grade glass
- Orange peel textured reflector
- Battery reverse polarity protection
- Waterproof to IPX8 (2 meters, 30 minutes)
-
Accessories in the package
- Two o-rings
- Headband with removable top strap, and a black silicone holder
Reviews
Customer Reviews
- The perfect colour of light and in addition very bright Review by Matthias
-
Rating
But it is very important to chose the right battery as not all 18650 fit and you will need a battery being able to provide the flashlight with high current. (Posted on 11-12-18) - The output is almighty: at H2 level it is in eccess of the H1 level of my H600 18650 XM-L2 Neutral White, with 1035Lm against 1020Lm. Review by YVES SOUSSI
-
Rating
Thanks NKON for having brought this Cree XHP50 5000K 3-steps tint deviation 1x18650 very good ZL to me.
1) The output is almighty: at H2 level it is in eccess of the H1 level of my H600 18650 XM-L2 Neutral White, with 1035Lm against 1020Lm.
Daniele already wrote a very good review about the Zebralight SC600Fd Mark IV Plus XHP50 Floody Neutral White 18650 Flashlight which is the same as the Zebralight H600Fd Mark IV XHP50.2
So if you have a hundred bucks in your pocket, dont waist your time !
Bien à vous
YVES SOUSSI (Posted on 30-11-18) - Vf of XHP50 is 12 volts but XHP50.2 (of the H600Fd) is 6 volts Review by YVES SOUSSI
-
Rating
1) Vf of XHP50 is 12 volts but XHP50.2 (of the H600Fd) is 6 volts
Forward voltage of the XML2 is 3 volts only.
The higher reliablility is for 6 volts of the XHP50.2 (H600Fd) because of the buck converter of the flashlight.
Like an elevator with a longer lifetime if it works in a 6 floors building rather than a 12 floors
Definitely the best choice is the Zebralight H600Fd Mark IV XHP50.2
Bien à vous
YVES SOUSSI
(Posted on 22-11-18) - Its a zebralight Review by Ivo
-
Rating
Typische zebralight kwaliteit en afwerking dus zeer gied
Puist licht (zeker als je een op een aa gewend was)
Moet even in het programmeren duiken zodat die zijn zoals ik wil
Die Floody 90 graden is ook fijn
Mis de lichtgevende reflector wel beetje
Clip zit er gewoon bij!
Dus ik heb er een over ga ik magneetjes op zetten
Dat ontbreekt beetje magnetische eindkap
Olight doet dat bijvb slimmer.
---------------------------
Just standing there doubting between 4000 and 5000k the 5000k is fine!
Typical zebralight quality and finish so very much
Poet light (especially if you were used to an AA)
Have to dive in programming so that they are as I want
That Floody 90 degrees is also nice
Do not miss the luminous reflector
Clip is just there!
So I'm going to put a magnet on it
That is missing some magnetic end cap
Olight does that for example smarter. (Posted on 16-10-18) - a Rolls Royce.. Review by YVES SOUSSI
-
Rating
1) a Rolls Royce..
What is the most important thing for me = voltage indication
I hate having to replace a mostly charged battery with a newly charged one, right before I go camping, just because I'm not 100% sure how much charge is left.
I am perfectly content with something like the Zebralight H600Fd : it just blinks the corresponding number of capacity left in the battery(s).
I accepted to pay 90 euros and i am happy
bien à vous
YVES SOUSSI
(Posted on 09-06-18) - XHP50.2: new construction: the dies much closer together than the XHP50, Review by YVES SOUSSI
-
Rating
1) XHP50.2: LED with new construction: the dies much closer together than the XHP50, and no dark cross..
2) When a low 0.5mA current is applied to the led it immediately shows the new construction: the dies much closer together than the XHP50, and no dark cross. so the build is similar to the XHP35, which does not suffer from donut holes. Also the rough phosfor layer can be seen, so probably no dedoming for this led!
3) If you love the Skilhunt H03 RC Cool White (almost "out of stock" today), you will also love the XHP50.2 of the H600Fd Mark IV ! For many reasons
It is brighter = X3 lumen of the Skilhunt H03 RC
It is safe = no dangerous magnetic charging,
It is economical = you can use unprotected Li-Ion
It has electronics management =
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
bien à vous
YVES SOUSSI (Posted on 31-05-18) - Accuracy of Battery capacity indicator Review by YVES SOUSSI
-
Rating
1) Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
3 flash is 3.8V = 0.4V
2 flash is around 3.55 V = 0.25V
1 flash is 3.35 V - 25 % of capacity, though it is not good to fully discharge à battery.= 0.20V
EMPTY !!
There is no zero flash response so 1 flash should be the voltage at which high1 drops right to high2 for lack of power.
2) You should use your LI-Ion between 4.2V and 3.3V (Between 4 flashs and 2 flashs) -
3) I cound not live one hour without this flashlight ! I am crazy about it and I am sure it will be "out of stock" soon, and many shortage for 2018 to purchase it through the year. If you read me, hurry up !
Best regards
Yves Soussi (Posted on 20-04-18) - GLS to Paris : J+2 - Phenomenal flashlight Review by Yves SOUSSI
-
Rating
1) GLS to Paris : J+2 (order wednesday , parcel received Friday @ 10.00 A.M. !!)
GLS Tracking for France
First translate the dutch tracking number from Nkon into the French TN (it is on the web site = https://gls-group.eu/FR/fr/suivi-colis
2) The XLamp XHP50.2 LeD is the next generation of extreme High Power LeDs !!
improves the lumen density, voltage characteristics, reliability and optical performance -
This is amazing LED.for everything : survival, adventure , reading on a PC screen, watching movies. etc
3) Multiple UI Groups
I've programmed my light with the lows in single-click, mediums in hold, and highs in double-click.
4) Product I love !
I write this reviews and I am not an member of Nkon's Staff. I just want to share my pleasure of using the best product on the market -I recommand a product that I love to unknown people around the world , it is a great experience - You will not disapointed if you purchase this flashlight, (if it is not "out of stock") an it will introduce beauty in your everyday life as it does for me from today.
Best regards and thank you to Mithat for listening to me
YVES SOUSSI
(Posted on 13-04-18)