Zebralight SC64c 18650 XP-L2 4000K High CRI Flashlight

Reviews: Be the first to review this product

Availability: In stock

€77.50

Quick Overview

Zebralight SC64w 18650 XHP35 Neutral White Flashlight

New High CRI flashlight by Zebralight. It uses one 18650 Li-ion battery. Unfortunately this series of XP-L2 LED's is not the best. Some have a slightly yellow spot in the middle of the beam and most of them have a yellowish ring around the edge of the beam. A handful of them even has some slight greenish colour. Nothing that would hinder you when walking in the forest, but on a white surface it is quite visisble.

This flashlight produces max. 900 lumen


This light needs batteries of 65mm long, it does not work with protected batteries (like from Keeppower, EagleTac or Enerpower) because these are to long. You need unprotected batteries These work fine

Zebralight SC64c 18650 XP-L2 4000K High CRI Flashlight

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Main Features and Specifications

  • Cree XP-L2 EasyWhite LED
    • Nominal CCT: 4000K
    • Typical CRI: 93-95
    • Tint deviation: 2-step
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes) 
    • High:        H1  900 Lm (PID, )   or  H2 579 Lm (PID, )/341 Lm ()/183 Lm ()
    • Medium:  M1  90 Lm ()   or   M2 40 Lm ()/16.6 Lm ()/6.2 Lm ()
    • Low:         L1  2.1 Lm ()  or  L2 0.67 Lm ()/0.19 Lm ()/0.05 Lm ()
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
  • Operating Voltage Range: 2.7V - 6.0V
  • Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • 80 degree spill
    • 12 degree hot spot
  • Dimensions
    • Head Diameter: 0.96 inch (24.5 mm)
    • Length: 3.64 inch (92.5 mm)
  • Weight
    • 1.3 oz (38 gram) without battery
  • Features
    • PID thermal regulated outputs (two highest output levels)
    • Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade  aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Tempered optical grade glass
    • Orange peel textured reflector
    • Battery reverse polarity protection
    • Pre-installed pocket clip
    • Waterproof to IPX8 (2 meters, 30 minutes)

 

Accessories in the package


  • Two o-rings
  • Pocket clip

Additional Information

Brand  Zebralight
EAN/GTIN  8438493104400
ANSI Lumen 900.00
Flashlight needs  18650 battery
LED type  XP-L2
LED colour  High CRI
Flashlight type  Daily use