You have no items in your shopping cart.

More Views

Zebralight SC600Fc Mark IV Plus XHP50 Floody 4000K High CRI Flashlight

Additional Information

EAN / GTIN  8438493104288
Brand  Zebralight
ANSI Lumen 1,816.00
Flashlight needs  18650 battery
LED type  XHP50
LED colour  High CRI
Flashlight type  Daily use
Beam distance  0

Availability: In stock

(€91.69 without VAT)



SC600Fc Mk IV Plus XHP50 Floody 4000K High CRI-zaklamp. Deze lamp heeft batterijen nodig van 65 mm lang, hij werkt niet met beschermde batterijen (zoals van Keeppower, EagleTac of Enerpower) omdat deze te lang zijn. Wij raden de Samsung INR18650-35E 3450mAh - 10A aan, omdat deze accu perfect past en voldoende Ampère kan leveren.

Deze zaklamp trekt een zeer hoge stroom van de batterijen. U MOET onbeschermde 18650's gebruiken die geschikt zijn voor 8A of meer, en van bekende merkfabrikanten. Helaas zijn alleen onbeschermde 18650-batterijen met een platte bovenkant tot 65,2 mm verdichtbaar. De helderheid kan worden gezien als minder in vergelijking met throwy lights & nbsp; met dezelfde output.

Additional Information


Main Features and Specifications

  • Cree XHP50 Cool White LED
    • Nominal CCT: 4000K
    • Typical CRI: 93-95
    • Tint deviation: 3-step
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes) 
    • High:        H1  1816 Lm (PID, )   or  H2 1035 Lm (PID, )/557 Lm (PID, )/283 Lm ()
    • Medium:  M1  135 Lm ()   or   M2 61 Lm ()/26 Lm ()/10.5 Lm ()
    • Low:         L1  4.0 Lm ()  or  L2 1.4 Lm ()/0.5 Lm ()/0.15 Lm ()
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
  • Operating Voltage Range: 2.7V - 6.0V
  • Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • Floody beam from frosted lens, with a 90 degree beam spread
  • Dimensions
    • Head Diameter: 1.2 inch (30 mm)
    • Body Diameter: 0.98 inch (25 mm)
    • Length: 3.8 inch (96 mm)
  • Weight
    • 2.26 oz (64 gram) without battery
  • Features
    • PID thermal regulated outputs (three highest output levels)
    • Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade  aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Tempered optical grade glass
    • Orange peel textured reflector
    • Battery reverse polarity protection
    • Pocket clip
    • Lanyard ring
    • Waterproof to IPX8 (2 meters, 30 minutes)


Accessories in the package

  • Two o-rings
  • Pocket clip


Customer Reviews

Bit pricey but good EDC flashlight Review by Ray
Very good color rendering
Can give a lot of light for a short time
Small flashlight, fits in pocket without problem

Gets hot very quickly at max settings
Bit pricey
A little too cool light for my taste

For this small size it is a very good EDC flashlight with a big kick (but short term due to heat) if needed. You will need an unprotected high drain battery. (Posted on 30-11-20)
A rare combination of high-quality light, excellent design and convenient flexible control. Review by Constantin
The decisive factor in choosing a flashlight was the declared CRI 93-95. Measurements at home with a spectrophotometer i1Pro and factory default settings yielded the following results:
H1 3906K, CRI Ra 90
H2 3869K, CRI Ra 91
M1 3815K, CRI Ra 93
M2 3816K, CRI Ra 93
L1 3784K, CRI Ra 93
I consider the results to be good, I think it is currently difficult to find a flashlight with better color rendering. My H600Fc III in the same conditions showed CRI 83 - 85. If the SC600Fc Mk IV Plus demonstrates stability and reliability in operation, I will have to buy the H600Fc Mk IV.
SC600Fc Mark IV Plus is an excellent choice for those who need a source of high-quality light, with a large range of available light output, the ability to fully utilize the energy of modern batteries and yet be light and compact for use as a EDC.
(Posted on 11-06-18)

Write Your Own Review

You're reviewing: Zebralight SC600Fc Mark IV Plus XHP50 Floody 4000K High CRI Flashlight

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars